TM 55-1520-240-23-6
7-66
REMOVE POWER TRANSFER UNIT FLOW LIMITER
(Continued)
7-66
NOTE
Procedure is same to remove flow
limiter in No. 1 or No. 2 unit. No. 1
unit is shown here.
1.
Tag and disconnect two tubes (1) from tee (2).
Use cloths (E135) for spilled fluid. Use gloves
(E186).
2.
Tag and remove tube (3).
3.
Remove tee (2) from limiter (4).
4.
Remove lockwire from limiter (4).
5.
Remove limiter (4), from housing (5).
6.
Remove two retainers (6) and two packings (7)
from limiter (4). Use cloths (E135) for spilled fluid.
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-296
