TM 55-1520-240-23-6
7-65
INSTALL POWER TRANSFER UNIT PILOT VALVE
(Continued)
7-65
5.
Remove lockwire from plug (9). Remove plug
and packing (10) from port (11).
6.
Fill motor (12) through port (11) with fluid (E199).
Use cloths (E135) for spilled fluid. Use gloves
(E186).
7.
Install plug (9) and packing (10) in port (11).
8.
Lockwire plug (9) to module (3). Use lockwire
(E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Service reservoir (Task 1-60, 1-61, or 1-62).
Bleed utility hydraulic system (Task 7-334).
Perform operational check (TM 55-1520-240-T).
Close right forward work platform or pylon access
doors (Task 2-2).
END OF TASK
7-294
