TM 55-1520-240-23-6
7-49
ASSEMBLE ACCUMULATOR (2770529) (AVIM)
(Continued)
7-49
17.
Install nut (4) on shell (1) hand tight.
18.
Clamp nut (4) in vise (10).
19.
Torque end cap (6) until hole (20) in end cap
(3) aligns with notch (21) in nut (4). Use 1 inch
crowfoot and torque wrench on end cap (5). Do
not exceed 1200 inch-pounds.
20.
Install pin (22) into hole (20).
21.
Lockwire cap (3) to nut (4). Use lockwire (E227).
22.
Lockwire cap (5) to nut (6). Use lockwire (E227).
23.
Remove nut (4) from vise (10).
INSPECT
7-240
