TM 55-1520-240-23-6
7-49
ASSEMBLE ACCUMULATOR (2770529) (AVIM)
(Continued)
7-49
12.
Install nut (6) on shell (1) over end cap (5). Use
strap wrench.
13.
Install two pins (15) in end cap (3). Pins shall be
from flush to 0.005 inch below surface of end
cap.
14.
Install retaining ring (16) and packing (17) on
end cap (3).
15.
Install end cap (3) in shell (1) on opposite end of
nut (6). Pins (15) shall be seated in shell grooves
(18).
16.
Remove shell (1) from vise (10).
7-239