TM 55-1520-240-23-6
7-48.2
DISASSEMBLE AND INSPECT ACCUMULATOR (60910) (AVIM)
(Continued)
7-48.2
6.
Remove housing (6) from vise (2).
Use care to avoid damage to
separator when removing it from
housing.
7.
Remove separator (12) from housing (6).
8.
Remove T-ring (13) from separator (12).
9.
Measure outside diameter of separator (12).
Diameter shall not be less than 1.611 inches.
10.
Measure inside diameter of housing (6).
Diameter shall not be more than 1.619 inches.
11.
Inspect all parts for wear and damage (cracks,
nicks, burrs, etc.). Carefully inspect inside wall of
housing for scoring. Replace parts as required.
NO BREAK - WORK HARDER
NO BREAK - WORK HARDER
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-235