TM 55-1520-240-23-6
7-321
FLUSH GROUND TEST, PUMP, HAND PUMP, AND RESERVOIR PRESSURE
TUBING
(Continued)
7-321
Filter assembly kit
ADHT6814-M9716M must be
installed in test stand pressure lines.
NOTE
To operate hydraulic test stand refer
to applicable manual.
1.
Working from ramp, disconnect tube (1) from
EXT POWER port (2) of power control module
(3).
2.
Disconnect tube (4) from PRESS IN ports (5)
of module (3).
3.
Connect hose (6) to tubes (1 and 4).
4.
Disconnect tube (7) from RSVR PRESS port (8)
of module (3).
5.
Connect test stand return hose (9) to tube (7).
6.
Tag and disconnect UTIL PUMP PRESS hose
(10) from fitting (11) at sta. 540. Use container
and cloths (E120) for spilled fluid. Use gloves
(E186).
7.
Install cap (12) on fitting (11).
7-1154