TM 55-1520-240-23-5
6-97
INSTALL AFT TRANSMISSION
(Continued)
6-97
REMOVE AFT ROTOR SHAFT SECURING DEVICE
NOTE
Securing device is removed with aid of
helper through access holes in pylon.
32.
Remove pins (77) from each side of rotor shaft
(7). Remove two adapter bars (78) from bolts (8).
33.
Loosen two knobs (79). Remove pins (80) from
plates (81). Remove two clamps (82).
INSTALL SEAL RETAINER
NOTE
Seal retainer is reached through open
aft transmission access doors on
each side of aft pylon.
34.
Align tab (83) on seal retainer (4) with slot (84)
in outer race of bearing (85). Install seal retainer
on studs (86).
35.
Install 10 washers (3) and nuts (2). Torque nuts
to 70 to 85 inch-pounds (wet).
6-373