TM 55-1520-240-23-5
6-97
INSTALL AFT TRANSMISSION
(Continued)
6-97
27.
Release four pins (65) from each hoist (15).
Remove two hoists.
28.
Install cover plate (66) forward of rotor shaft (7).
Tighten four turnlock fasteners (67).
NOTE
Long bolt goes through fixed link.
29.
Untie yoke (68). Install actuator (69) and link (70)
in yoke. Install two bolts (71), heads facing each
other, recessed washers (72), with recess toward
bolt head, washers (73), and nuts (74).
30.
Install actuator (69) in swashplate yoke (75).
31.
Torque nuts (74) to 660 to 780 inch-pounds.
Do not exceed 1400 inch-pounds for cotter pin
alignment. Install cotter pins (76).
6-372
