TM 55-1520-240-23-5
6-51
INSTALL FORWARD TRANSMISSION PACKAGE
(Continued)
6-51
MOUNT TRANSMISSION
Check the forward or aft transmission
Serial numbers for a "MG". A "MG"
after the serial number is required on
the forward and aft transmissions for
non restrictive flight.
NOTE
Hoisting eye must trail aft to keep
transmission at proper angle for
installation.
1.
Install hoisting eye (T32) (1) in shaft (2) so that
FWD XMSN hole (3) points toward oil cooler (4).
2.
Connect work hoist (5) to FWD XMSN hole (3) of
hoisting eye (T32) (11).
3.
Remove three nuts (6) and bolts (7).
4.
Attach two rope guide lines (8) to transmission
(9).
6-191