TM 55-1520-240-23-5
6-51
INSTALL FORWARD TRANSMISSION PACKAGE
6-51
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Hoisting Eye (T32)
Work Hoist
Torque Pack (T23)
Torque Reactor Assembly (T159)
Tee Handle (T161)
Open-End Wrench, 1 Inch
Rope Guide Lines
Torque Wrench, 5-50 Inch-Pounds
Torque Wrench, 30-150 Inch-Pounds
Materials:
Lockwire (E229)
Grease (E190)
Crocus Cloth (E122)
Personnel Required:
CH-47 Helicopter Repairer (3)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
WARNING
Make sure ratchet selector on torque
pack is set to NUT ON before applying
torque. Changing ratchet setting with
torque applied can damage unit and
can cause injury to personnel.
WARNING
Do not install pumps with serial
numbers V534 through V598. ASAM
96-08 directed removal of these
pumps. If found, these pumps are to
be removed from service and returned
for rework. If the lubrication pump
has a "RW" suffix to the pump serial
number, the pump has been reworked
and is acceptable for use.
6-190
Change 1
