TM 55-1520-240-23-5
6-50
ASSEMBLE FORWARD TRANSMISSION PACKAGE (Continued)
6-50
40.
Check clearance between end of bolt (80) and
inside of lug (72). Clearance shall be at least
0.005 inch. Add washers (81) under bolthead
as needed.
41.
Install cotter pin (84) in bolt (80). Lockwire bolt to
hole in right side of lug (72). Use lockwire (E231).
RETORQUE AUXILIARY OIL FILTER
42.
Remove lockwire from auxiliary oil filter (86).
NOTE
Do not remove filter.
43.
Check wrenching flats on filter (86). If they are
damaged, replace filter (Task 6-129).
44.
Loosen filter (86) 1/2 turn. Torque filter to 80
inch-pounds.
45.
Lockwire filter (86) to inlet screen (85). Use
lockwire (E231).
INSPECT
FOLLOW-ON MAINTENANCE:
Inspect servocylinders (Task 7-123).
Install rotary-wing head (Task 5-9).
Inspect forward and aft rotor shaft splines (Task 6-68).
END OF TASK
Change 1
6-189
