TM 55-1520-240-23-4
5-125
INSTALL SWASHPLATE BALL SPHERICAL BEARING
(Continued)
5-125
4.
Position sperical bearing (8) on lower bearing (5).
5.
Lightly coat outside surfaces of upper spherical
bearing (9) with epoxy primer (E292) and allow
to dry before installation. Tap upper bearing (9),
thickest edge up, into position over spherical
bearing (8) if necessary. Use phenolic drift.
6.
Tap retaining spacer (10) into stationary ring (6)
if necessary. Use phenolic drift. Ensure that the
thick edge of spacer (10) is at the top.
5-689
