TM 55-1520-240-23-4
5-125
INSTALL SWASHPLATE BALL SPHERICAL BEARING
(Continued)
5-125
NOTE
Procedure is similar to install forward
or aft swashplate ball spherical
bearing. Differences are noted in text.
Lower bearing, bearing spacer, and
upper bearing are matched set. Keep
parts together.
If removed bearings and spacers are
being reinstalled, align matchmarks
with matchmark on stationary ring.
1.
Position swashplate (1 or 2) on blocks (3),
rotating ring (4) up.
2.
Lightly coat outside surfaces of lower spherical
bearing (5) with epoxy primer (E292) and allow
to dry before installation. Tap lower bearing (5),
thickest edge down, into stationary ring (6). Use
phenolic drift.
3.
Tap bearing spacer (7) into position against lower
bearing (5) if necessary. Use phenolic drift.
5-688
