TM 55-1520-240-23-4
5-125.1
INSTALL SWASHPLATE BALL SPHERICAL BEARING
5-125.1
INITIAL SETUP
Applicable Configurations:
With 83
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-00-003-5267
Mallet
Phenolic Drift, 1/2 Inch x 2 Inches x 10 Inches
Wood Blocks (9), 2 Inches x 4 Inches x 10 Inches
Each
Goggles
Torque Wrench, 0 to 150 Inch-Pounds
Torque Wrench, 100 to 750 Inch-Pounds
Materials:
Lockwire (E231)
Lockwire (E233)
Epoxy Primer (E292)
Gloves (E184.1)
Kevlar Gloves (E187)
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its
inspection, assembly, and installation
must be adhered to.
Epoxy primer (E292) is flammable
and very toxic. It can irritate skin
and cause burns. Protective clothing
or body suit with respirator and eye
protection is required if material is to
be applied by spraying. Use only in
well-ventilated area, away from open
flame and excessive heat. In case
of contact, immediately flush skin or
eyes with plenty of water for at least
15 minutes. Get medical attention
for eyes.
5-692
