TM 55-1520-240-23-4
5-125
INSTALL SWASHPLATE BALL SPHERICAL BEARING
5-125
INITIAL SETUP
Applicable Configurations:
Without
83
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-00-003-5267
Mallet
Phenolic Drift, 1/2 Inch x 2 Inches x 10 Inches
Wood Blocks (9), 2 Inches x 4 Inches x 10 Inches
Each
Goggles
Torque Wrench, 0 to 150 Inch-Pounds
Torque Wrench, 100 to 750 Inch-Pounds
Materials:
Lockwire (E231)
Lockwire (E233)
Epoxy Primer (E292)
Gloves (E184.1)
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its
inspection, assembly, and installation
must be adhered to.
Epoxy primer (E292) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat and open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
5-687
