TM 55-1520-240-23-4
5-36
REMOVE VERTICAL HINGE PIN BEARING
(Continued)
5-36
8.
Tighten bolt (12) until bearing (13) is drawn out
of lug (2).
9.
Remove nut (11), washer (10), base (8), bolt
(12), cap (9), and bearing (13).
The bearing and the inner race
are a matched set and must be
kept together as a unit; otherwise,
excessive wear will occur.
10.
Tag bearing (13) with rotary-wing head, color of
pitch housing, and lug from which bearing was
removed.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-165