TM 55-1520-240-23-4
5-39
INSTALL VERTICAL HINGE PIN BEARING
5-39
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-00-003-5267
Bearing and Seal Puller (T10)
Heater Gun
Materials:
Cloth (E120)
Dry Cleaning Solvent (E162)
Gloves (E186)
Kevlar Gloves (E187)
Lubricating Oil (E254)
Temperature Indicating Strips (E413)
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes for at least 15 minutes.
Get medical attention for eyes.
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
plenty of water for at least 15 minutes.
Get medical attention for eyes.
5-170
