TM 55-1520-240-23-4
5-34
INSTALL VERTICAL HINGE PIN OUTER SEAL
5-34
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-00-003-5267
Aircraft Inspector’s Tool Kit, NSN 5180-00-323-5114
Wood Block, 5 Inch Diameter x 4 Inches
Materials:
Cloths (E120)
Dry Cleaning Solvent (E162)
Gloves (E186)
Adhesive (E63.1) or Sealant (E340.3)
Methyl-Ethyl-Ketone (E244)
Personnel Required:
Aircraft Powertrain Repairer (2)
Inspector
References:
TM 55-1520-240-23P
General Safety Instructions:
Methyl-ethyl-ketone (E244) and
dry cleaning solvent (E162) are
flammable and toxic. They can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes. Use gloves
(E186).
Adhesive (E63.1) and sealant
(E340.3) can irritate skin and cause
burns. Avoid contact with skin, eyes
and clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
5-157
