TM 55-1520-240-23-4
5-32
REMOVE VERTICAL HINGE PIN OUTER SEAL
5-32
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairers Tool Kit, NSN
5180-00-003-5267
Drift, Soft Aluminum, 1/2 Inch Diameter
Materials:
None
Personnel Required:
Aircraft Powertrain Repairer (2)
Equipment Condition:
Off Helicopter Task
Vertical Hinge Pin Oil Tank Removed (Task 5-28)
NOTE
Procedure is same to remove outer
seal from all 12 vertical hinge pin oil
tanks.
1.
Position tank (1), packing groove (2) up, on flat
work surface.
2.
Remove retaining ring (3) from seal (4). Use
small screwdriver.
3.
Position tank (1) with filler ports (5) up.
4.
Tap seal (4) out of tank (1). Use hammer and
soft aluminum drift.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
5-154