TM 55-1520-240-23-3
4-118
ADJUST ENGINE DROOP ELIMINATOR VARIABLE RESISTORS
(Continued)
4-118
13.
Connect multimeter (10) to terminals 5 (16) and
6 (17) on No. 1 resistor (13).
14.
Remove rigging pin (8) from thrust control idler
(9).
15.
Set thrust control (18) to ground detent.
16.
Check multimeter (10). Multimeter shall read 133
to 147 ohms. Disconnect multimeter. Set thrust
control (18) to neutral.
4-415
