TM 55-1520-240-23-3
4-11
DISASSEMBLE POWERPLANT
(Continued)
4-11
9.
On No. 1 powerplant, remove three screws (29),
washer (30), spacer (31), and three nuts (32).
Remove four clamps (33). Tag and remove two
hoses (34). Use tape (E388) to mark clamp
locations.
10.
On No. 2 powerplant, remove two screws (35)
and nuts (36). Remove four clamps (37). Tag
and remove two hoses (34). Use tape (E388) to
mark clamp locations.
11.
Remove two screws (38) and nuts (39), and
remove four clamps (40). Use tape (E388) to
mark clamp locations. Tag and remove hose
(41).
4-62