TM 55-1520-240-23-3
4-10.1
REMOVE POWERPLANT
(Continued)
4-10.1
18.
Position powerplant (1) on trailer adapter (T16)
(47). Make sure forward engine mount adapter
(48) and aft link (45) align with adapter fittings
(49 and 50). Make sure bearing (44) does not tilt
or wedge in adapter fitting (50).
19.
Install pin (51) through link (45) and fitting (50)
on adapter (47).
20.
Raise four bolts (52) over engine mount adapter
(48). Tighten bolts.
21.
Disconnect hoist (34) from sling (23).
22.
Remove sling (23) from powerplant (1) by
disconnecting three cables (26 and 28).
23.
Remove rope guidelines (42).
4-57