TM 55-1520-240-23-3
4-11
DISASSEMBLE POWERPLANT
(Continued)
4-11
4.
Loosen screw (13) on clamp (14). Tag and
disconnect hose (15) from oil filler (16).
5.
Remove screw (17) and nut (18) and remove two
clamps (19). Use tape (E388) to mark clamp
location.
6.
Remove screw (20) and nut (21) and remove two
clamps (22). Use tape (E388) to mark clamp
location. Remove hose (15).
7.
Remove screw (24) and nut (25). Remove two
clamps (26). Use tape (E388) to mark clamp
location.
8.
Disconnect hose (27) at elbow (28). Tag and
remove hose. Use container and cloths (E135)
for spilled fluid.
4-61