TM 55-1520-240-23-3
4-11
DISASSEMBLE POWERPLANT
(Continued)
4-11
NOTE
Procedure is same to disassemble
No. 1 or No. 2 powerplant, except as
noted. Disassembly of No. 1 power
plant is shown here.
1.
Remove two screws (1) and nuts (2) and remove
four clamps (3). Use tape (E388) to mark clamp
locations.
2.
Disconnect hose (4) at fitting (5). Tag and
remove hose.
3.
Remove screw (6) and nut (7) and remove two
clamps (8). Use tape (E388) to mark clamp
locations. Tag, disconnect, and remove two
hoses (9) from fuel pump (10). Remove two
reducers (11) and packings (12).
4-60
