TM 55-1520-240-23-3
4-10.1
REMOVE POWERPLANT
(Continued)
4-10.1
4.
Remove six screws (8) and six nuts (9). Remove
twelve clamps (10). Mark clamp locations. Use
tape (E388).
5.
On No. 2 engine only:
a.
Remove clamp (11) and bolt (12).
b.
Mark clamp (11) location with tape (E388).
6.
Disconnect two bonding jumpers (13).
7.
Disconnect cable plug (14) from oil pressure
transmitter (15). Disconnect oil hose (16). Drain
oil into container. Wipe up any spilled oil. Use
cloths (E135).
Fuel boost pump inlet fitting must be
loosened before engine removal.
4-54
