TM 55-1520-240-23-3
3-68
INSTALL SWIVEL LOCK
3-68
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
Lockwire (E231)
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
NOTE
Procedure is same for both locks on
aft left and right gear. Left gear is
shown here.
NOTE
Lock can drop out of bottom. Hold
hand under opening to catch spacer.
1.
Install sleeve spacer (1), spring (2), and lock (3)
in spindle (4). Align holes with threaded holes in
spindle. Make sure flats of lock face each other.
2.
Install two screws (5) and washers (6) in spindle
(4). Lockwire screws with lockwire (E231).
3.
Depress lock (3). Make sure lock springs back.
INSPECT
3-181
