TM 55-1520-240-23-3
3-69
REMOVE STEERING LEVER
(Continued)
3-69
Do not let power steering assembly
fall when attaching bolts are removed.
Equipment could be damaged.
2.
Remove two nuts (5) and lower washers (6).
3.
Have helper hold power steering assembly (7) in
place. Remove two bolts (8) and upper washers
(6).
4.
Move power steering assembly (7) out of lugs
on swivel housing (9).
5.
Lift power steering actuator rod-end (10) off
stud on lever (4). Push rod-end (10) into power
steering assembly (7).
6.
Position power steering assembly (7) in lugs on
swivel housing (9). Install bolts (8), washers (6),
and nuts (5) loosely to hold it in place.
7.
Remove spacer (11) from steering lever (4).
8.
Remove nut (12), two washers (13), and bolt (14).
9.
Remove end cap (15).
10.
Remove steering lever (4) and spacer (16).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
3-184
