TM 55-1520-240-23-3
3-70
INSTALL STEERING LEVER
3-70
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 700 to 1600 Inch-Pounds
Torque Wrench, 100 to 750 Inch-Pounds
Materials:
Antiseize Compound (E75)
Parts:
Cotter Pin
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
1.
Install spacer (1) over spline (2) on swivel
housing (3).
2.
Align index marks on steering lever (4) and spline
(2). Install lever on spline.
3.
Install bolt (5), two washers (6), and nut (7).
4.
Install end cap (8). Torque cap to 31 to 37
inch-pounds. Check that sleeve spacer has
slight end play.
5.
Install spacer (9) on steering lever stud (10).
3-185
