TM 55-1520-240-23-3
3-66
INSTALL SWIVEL HOUSING AND SPINDLE
(Continued)
3-66
4.
Untie drag link (8). Position drag link in housing
(1) as shown.
5.
Install bolt (9), washer (10), and nut (11). Torque
nut to 350 to 500 inch-pounds. Install cotter
pin (12).
6.
Pull down shock strut piston (13) and align hole
in piston with hole in attach fitting (14).
7.
Install bolt (15), washer (16), and nut (17).
Torque nut to 25 to 35 inch-pounds. Install
cotter pin (18).
8.
Install packing (19), retainer (20), and elbow (21)
on swivel housing (1).
9.
Connect brake tube (22) to elbow (21). Tighten
nut (23).
10.
Install clamp (24), and nut (25). Lockwire clamp
with lockwire (E231).
11.
On left gear only, install static ground wire (26)
(Task 3-38).
3-177