TM 55-1520-240-23-3
3-66
INSTALL SWIVEL HOUSING AND SPINDLE
3-66
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 100 to 750 Inch-Pounds
Socket, 1 Inch
Socket, 2-1/8 Inch
Materials:
Grease (E190)
Lockwire (E231)
Parts:
Cotter Pins
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 3-38
Task 3-70
NOTE
Procedure is same for aft right or aft
left landing gear except as noted in
task.
1.
Have helper align swivel housing (1) and spindle
(2) with lower drag link (3). Untie drag link.
2.
Coat pin (4) with grease (E190). Install pin
through housing (1) and drag link (3).
3.
Install washer (5) and nut (6). Torque nut to 350
to 500 inch-pounds. Install cotter pin (7).
3-176
