TM 55-1520-240-23-3
3-70
INSTALL STEERING LEVER
(Continued)
3-70
6.
Remove two nuts (11) and lower washers (12).
Do not let power steering assembly
fall when attaching bolts are removed.
Equipment could be damaged.
7.
Have helper hold power steering assembly (13).
Remove two bolts (14) and washers (12).
8.
Install power steering rod-end (15) over stud (10)
on steering lever (4).
Antiseize compound (E75) can form
toxic vapors if exposed to flame. Use
in well-ventilated area away from open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
9.
Apply antiseize compound (E75) to shank of bolts
(14). Align holes in power steering assembly
(13) and swivel housing (3). Install two bolts (14)
and washers (12).
3-186