TM 55-1520-240-23-10
16-27
ASSEMBLE FORWARD OR AFT CARGO HOOK (AVIM) (Continued)
16-27
59.
Remove tag, and install switch (107), two screws
(108), four washers (109), and two nuts (110) on
bracket (111). Center adjustment slot (112) of
switch (107) on bracket (111).
60.
Install bracket (111), two screws (113), and
washers (114) on rear plate (25). Torque screws
to 13 inch-pounds.
61.
Lockwire screws (113) together. Use lockwire
(E227).
62.
Remove tags, and install three switches (115),
six screws (116), and washers (117) rear plate
(25). Center adjustment slots (118) of switches.
63.
Position relay (119) and ground wire (120) on
rear plate (25). Install three screws (121) and
washers (122). Torque screws to 9 inch-pounds.
Lockwire screws. Use lockwire (E227).
64.
Remove tags and install six modules (123).
Tighten lock screw (124).
65.
Connect wires (125) from switches (107) and
(115), relay (119), solenoid (55), and ground
wire (120) to modules (123). Use contact
insertion/extraction tool.
66.
Position gasket (126) on harness (127). Install
harness with wires pointing towards top of hook.
Install four screws (128) and washers (129) in
cover (130). Torque screws 8-10 inch-pounds.
Lockwire screws. Use lockwire (E227).
66.1. Apply sealant (E340.1) around harness (127)
where it comes through cover (130). Wear gloves
(E184.1).
16-149
