TM 55-1520-240-23-10
16-27
ASSEMBLE FORWARD OR AFT CARGO HOOK (AVIM)
(Continued)
16-27
75.
Install seal (149), spring facing out, and retaining
ring (150).
76.
Align holes of retainer plug (151) and knob
retainer (152) and install plug. Seal plug end
of retainer with adhesive (E57). Wear gloves
(E184.1).
77.
Install retainer (152) in cover (153).
78.
Apply adhesive (E57) inside knob (154). Align
holes of knob and retainer (152). Install knob on
retainer. Wear gloves (E184.1).
79.
Fill roll pin (155) with adhesive (E57). Install roll
pin in knob (154) and retainer plug (152). Center
roll pin in knob. Wear gloves (E184.1).
80.
Install cable adapter (156) in cover (153).
81.
Position spring (157) and install pin (158) in arm
(159).
82.
Position arm (159) and spring (157) in cover
(153). Install pin (160).
INSPECT
16-151
