TM 55-1520-240-23-9
11-239
INSTALL TUNNEL AFT CONNECTING LINKS
(Continued)
11-239
1.
Position right tunnel aft connecting link (1) in idler
bellcrank (2). Remove tag.
2.
Install bolt (3), two washers (4 and 5), and nut
(6). Torque nut to 60 to 90 inch-pounds. Install
cotter pin (7).
3.
Check bolt (3). Bolt shall not rotate with torque
less than 10 inch-pounds. Bolt shall have no
axial looseness, if bolt rotates or is loose, add
washer under nut and repeat step 2.
11-930
