• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
REMOVE  LINEAR TRANSDUCER END FITTING BEARING  (AVIM)
INSTALL LINEAR  TRANSDUCER END  FITTING  BEARING (AVIM) (Continued)

TM-55-1520-240-23-9 CH-47D Heilcopter Manual
Page Navigation
  684    685    686    687    688  689  690    691    692    693    694  
TM  55-1520-240-23-9 11-175 INSTALL LINEAR TRANSDUCER  END  FITTING BEARING (AVIM) 11-175 INITIAL  SETUP Applicable Configurations: All Tools: Aircraft  Mechanic’s Tool  Kit, NSN 5180-00-323-4692 Arbor  Press Adapters Staking  Tool,  Circumferential  Line  Type Materials: Carbon  Dioxide  (Dry Ice)  (E92) Methanol  (E243) Epoxy  Primer (E292) Cloth  (E120) Gloves  (E184.1) Kevlar  Gloves  (E187) Personnel  Required: Machinist Inspector References: TM  55-1520-240-23P TM  55-1500-322-24 General Safety Instructions: Carbon  dioxide  (dry  ice)  (E92)  is toxic.   It  can  irritate  skin  and  cause burns.   Avoid  inhaling.  Use  only with adequate  ventilation.   Avoid  contact with  skin, eyes,  or  clothing.   In  case of  contact,  immediately  flush  skin or  eyes  with  water  for  at  least  15 minutes.   Get medical  attention  for eyes. Methanol  (E243) is  flammable  and toxic.   Use  only  with  adequate ventilation.  Keep  away from  heat and open  flame.   Do  not  inhale.   Do  not contact  eyes,  skin,  or  clothing.   In case  of  contact,  immediately  flush skin  or  eyes  with  water for  at  least 15  minutes.   Get medical  attention for  eyes. Carbon  dioxide  (dry  ice)  (E92)  in methanol  (E243) has a  temperature  of -120ºF (-84ºC).  Employ  all  suitable safety measures  when  working  with dry  ice  (E92)  and  methanol  (E243), and  when  handling  chilled  parts. Avoid  breathing  carbon  dioxide  vapor. Wear protective  Kevlar gloves (E187) when  handling  chilled  bearing. 11-695







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.