TM 55-1520-240-23-9
11-172
REMOVE LINEAR TRANSDUCER ROD END BEARING (AVIM)
11-172
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
Off Helicopter Task
1.
Remove lockwire from nut (1).
2.
Hold transducer (2) with wrench on hexagon (3).
Loosen nut (1) and back off several turns.
3.
Separate outer part (4) of locking device from
inner part (5) of locking device.
4.
Unscrew rod end (6) from transducer (2).
5.
Remove locking device (4 and 5) and nut (1)
from rod end (6). Retain locking device and nut
for reassembly.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-691