• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TEST HYDRAULIC  PRESSURE  INDICATOR
TEST HYDRAULIC RESERVOIR  LEVEL INDICATORS (Continued)

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
  257    258    259    260    261  262  263    264    265    266    267  
TM  55-1520-240-23-7 8-84 TEST  HYDRAULIC  RESERVOIR  LEVEL INDICATORS 8-84 INITIAL  SETUP Applicable  Configurations: All Tools: Electrical  Repairer’s Tool  Kit, NSN 5180-00-323-4915 Meter  Test  Set  TS-682A/GSM-1 Connector,  MS3476W8-33S Wire,  No.   20,  Unshielded Materials: None Personnel  Required: Aircraft  Electrician Inspector References: TM  11-6625-277-14 Equipment  Condition: Off  Helicopter  Task Electrical  Test  Setup NOTE Test  setup  is  the  same  for  both  utility, hydraulic,  or flight  control  reservoir indicators.  If  testing  utility  indicator, go  to  step  1.  If  testing  flight  control indicator, go  to  step  6. TEST UTILITY HYDRAULIC RESERVOIR INDICATOR 1. Adjust meter test set  (1) to  0 milliamperes  (TM 11-6625-277-14). 2. Connect  utility hydraulic reservoir indicator  (2) to  test  setup. 3. Apply power to  test  setup  and  adjust  meter test set  (1) (TM  11-6625-277-14).   For  indicator (2) outer  scale  marks,  milliampere  readings  shall be  as  follows: 8-272







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.