TM 55-1520-240-23-9
11-22
INSTALL COCKPIT RIGGING FIXTURE, STICK YOKE, PEDAL PIN AND THRUST
PIN
(Continued)
11-22
INSTALL CONTROL STICK YOLK
3.
Press and hold CENTERING DEVICE RELEASE
switch (5) on copilot’s control stick grip (6). Move
stick forward about 4 inches.
4.
Slide rod (7) of yoke (8) into hole (9) from top.
5.
Position grip (6) of stick (10) over yoke (8). Lift
yoke and position grip in yoke between grip and
first rivet (11) of stick. Release switch (5).
6.
Install lock pin (12) through yoke and across
stick. If grip cannot be installed in yoke, perform
Task 11-42.
INSPECT
INSTALL PEDAL RIG PIN
7.
Press lever (13) of right pedal. Position pedal aft.
Install pedal rig pin (15) in left pedal tube (16)
and between two lugs (17) of fixture (1).
8.
Push right pedal forward to center adjustment
hole (18). Release lever (13).
9.
Align pedal tube (19) and pin (15). Slide pin in
tube. If pin does not slide in tube, perform Task
11-42.
11-83
