TM 55-1520-240-23-9
11-22
INSTALL COCKPIT RIGGING FIXTURE, STICK YOKE, PEDAL PIN AND THRUST
PIN
(Continued)
11-22
INSTALL THRUST RIG PIN
10.
Press and hold THRUST CONT BRAKE
TRIGGER (20) of thrust control (21). Pull control
up about 5.5 inches. Release trigger.
11.
Position thrust rig pin (22) in hole (23). Press
and hold trigger (20). Slide pin down through
assembly (2). Move control (21) up then down
until pin slides fully down. Release trigger. If pin
does not slide fully down, perform Task 11-42.
12.
Take and record measurements required for rig
position check (Task 11-32).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-84
