TM 55-1520-240-23-9
11-189
INSTALL FIRST STAGE MIXING ASSEMBLY
(Continued)
11-189
28.
Remove nut (35), two washers (36 and 37), and
bolt (38) from bellcrank (23).
29.
Position upper inboard link (39) in bellcrank (23).
30.
Install bolt (38), two washers (37 and 36), and
nut (35). Do not torque nut at this time.
31.
Remove nut (40), two washers (41 and 42), and
bolt (43) from bellcrank (18).
32.
Position upper outboard link (44) in bellcrank
(18).
33.
Install bolt (43), two washers (42 and 41), and
nut (40). Do not torque nut at this time.
INSTALL PITCH AND THRUST CONNECTING LINK
34.
Remove nut (45), two washers (46 and 47), and
bolt (48) from bellcrank (7).
35.
Position pitch and thrust link (49) in bellcrank (7).
36.
Install bolt (48), two washers (47 and 46) and nut
(45). Do not torque nut at this time.
37.
Remove nut (50), two washers (51 and 52), and
bolt (53) from bellcrank (23).
38.
Position link (49) in bellcrank (23).
39.
Install bolt (53), two washers (52 and 51), and
nut (50). Do not torque nut at this time.
11-759
