TM 55-1520-240-23-9
11-157
ASSEMBLE THRUST CCD ACTUATOR (AVIM)
11-157
INITIAL SETUP
Applicable Configurations:
All
Tools:
Tool Kit, Electronic Equipment TK-1051G, NSN
5180-00-610-8177
Arbor Press
Drill Bushing, 0.312 Inch Outside Diameter
Feeler Gage
Torque Wrench, 5 to 50 Inch-Pounds
Crowfoot, 1 Inch
Materials:
Hydraulic Fluid (E199)
Lockwire (E229)
Solder (E360)
Cloths (E120)
Sealant (E345)
Silicone Grease (E461)
Epoxy Primer (E292)
Sleeving (E204)
Gloves (E184.1)
Parts:
Cotter Pin
Rivet
Shims
Personnel Required:
Avionic Navigation and Flight Control Equipment
Repairer
Inspector
References:
TM 55-1520-240-23P
Task 11-279
General Safety Instructions:
Sealant (E345) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
11-640
