TM 55-1520-240-23-9
11-155
DISASSEMBLE THRUST CCD ACTUATOR (AVIM)
11-155
INITIAL SETUP
Applicable Configurations:
All
Tools:
Tool Kit, Electronic Equipment TK-105/G, NSN
5180-00-610-8177
Arbor Press
Crowfoot, 1 Inch
Materials:
Tags (E264)
Personnel Required:
Avionic Navigation and Flight Control Equipment
Repairer
Equipment Condition:
Off Helicopter Task
1.
Remove lockwire from two screws (1). Heat
heads of screws to soften sealing compound.
Use soldering gun. Remove screws and washers
(2) from receptacle (3).
2.
Remove four screws (4) and washers (5) from
cover (6). Remove cover from chassis (7).
3.
Tag and unsolder seven wires (8) from amplifier
(9).
4.
Remove screw (10) from chassis (7). Remove
amplifier (9). Heat screw heads. Use soldering
gun.
5.
Remove two screws (11), and washers (12),
from board (13). Remove board from chassis (7).
Heat screw heads. Use soldering gun.
6.
Tag and unsolder six wires (14) from terminal
board (13).
7.
Remove two screws (15) and washers (16) from
board (17). Remove board from chassis (7).
Heat screw heads. Use soldering gun.
8.
Tag and unsolder two wires (18) from terminal
board (17).
11-636
