TM 55-1520-240-23-9
11-74
REMOVE COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-74
REMOVE YAW AND ROLL TRANSFER CONNECTING
LINKS
12.
Move bellcrank (18) for access to bolt (19).
Remove cotter pin (20), nut (21), two washers
(22), and bolt from bellcrank.
13.
Tag and disconnect yaw connecting link (23)
from bellcrank (19).
14.
Install bolt (19), two washers (22), and nut (21)
in bellcrank (18).
15.
Move bellcrank (24) to align bolt (25) and hole
(26). Have helper in cockpit hold bolt (25).
16.
Working through left access (6) remove cotter pin
(27), nut (28), two washers (29), and bolt (25).
17.
Tag and disconnect roll connecting link (30) from
bellcrank (24).
18.
Install bolt (25), two washers (29), and nut (28)
in bellcrank (24).
19.
Working from passageway, remove cotter pin
(31), nut (32), two washers (33), and bolt (34)
from bellcrank (35).
20.
Remove yaw link (23) from bellcrank (35). Slide
link fully aft.
21.
Install bolt (34), two washer (33), and nut (32)
in bellcrank (35).
22.
Remove cotter pin (36), nut (37), two washers
(38), and bolt (39) from bellcrank (40).
23.
Remove roll link (30) from bellcrank (40). Slide
link about 10 inches aft.
24.
Install bolt (39), two washers (38), and nut (37)
in bellcrank (40).
11-331
