TM 55-1520-240-23-9
11-74
REMOVE COPILOTS COCKPIT CONTROL ASSEMBLY
(Continued)
11-74
7.
Tag and disconnect six hydraulic hoses (10) from
cylinders (11). Use container and cloths (E120)
for spilled fluid.
NOTE
Attaching bolt, washers, and nut will
be temporarily installed after links are
removed.
DISCONNECT THRUST CONTROL
8.
Have helper in cockpit set thrust control (12) fully
down.
9.
Working through left access (6), remove cotter
pin (13), nut (14), two washers (15), and bolt (16)
from bellcrank (17).
10.
Disconnect control (12) from bellcrank (17).
Have helper in cockpit set control fully up and
secure up. Use strap (E376).
11.
Install bolt (16), two washers (15), and nut (14)
in bellcrank (17).
11-330