TM 55-1520-240-23-9
11-75
DISASSEMBLE PILOT’S COCKPIT CONTROL ASSEMBLY
11-75
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Retaining Ring Pliers
Gun Heater
Materials:
Paper Tags (E264)
Personnel Required:
Medium Helicopter Repairer
Aircraft Structural Repairer
References:
TM 1-1520-253-23
Equipment Condition:
Off Helicopter Task
NOTE
If a crack in the connecting link,
bellcrank, or support is suspected
during disassembly, refer to TM
1-1520-253-23.
1.
Remove cotter pin (1), nut (2), two washers (3),
and bolt (4) from support arm (5).
2.
Remove cotter pin (6), nut (7), two washers (8),
and bolt (9) from pedal (10). Remove cylinder
(11).
3.
Remove cotter pin (12), nut (13), two washers
(14), and bolt (15) from support arm (16).
4.
Remove cotter pin (17), nut (18), two washers
(19), and bolt (20) from pedal (21). Remove
cylinder (22).
11-336
