TM 55-1520-240-23-9
11-74
REMOVE COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-74
DISCONNECT PITCH AND THRUST TRANSFER
CONNECTING LINKS
25.
Working through left access (6), remove cotter
pin (41), nut (42), two washers (43), and bolt (44)
from bellcrank (45).
26.
Tag and disconnect thrust connecting link (46)
from bellcrank (45).
27.
Install bolt (44), two washers (43), and nut (42)
in bellcrank (45).
28.
Remove cotter pin (47), nut (48) two washers
(49), and bolt (50) from bellcrank (51).
29.
Tag and disconnect pitch connecting link (52)
from bellcrank (51).
30.
Install bolt (50), two washers (49), and nut (46)
in bellcrank (51).
REMOVE YAW CONNECTING LINK
31.
Move bellcrank (53) for access to link (54).
32.
Tag yaw connecting link (54). Remove cotter pin
(55), nut (56), two washers (57) and bolt (58)
from bellcrank (53). Disconnect link.
33.
Move bellcrank (18) for access to link (54).
34.
Remove cotter pin (59), nut (60), two washers
(61), and bolt (62) from bellcrank (18).
Disconnect link (54) from bellcrank. Slide link
fully right.
35.
Install two bolts (58 and 62), four washers (57
and 61) and two nuts (56 and 60) in bellcranks
(53 and 18).
11-332
