TM 55-1520-240-23-9
11-73
REMOVE PILOTS COCKPIT CONTROL ASSEMBLY
(Continued)
11-73
DISCONNECT THRUST CONTROL
40.
Have helper in cockpit set thrust control (68) fully
down.
41.
Working through right access (32) remove cotter
pin (69), nut (70), two washer (71), and bolt (72)
from bellcrank (73).
42.
Disconnect control (68) from bellcrank (73).
Have helper in cockpit set control fully up and
secure up. Use strap (E376).
43.
Install bolt (72), two washers (71), and nut (70)
in bellcrank (73).
DISCONNECT CONTROL STICK INDICATOR
44.
Working through right access (32), move
bellcrank (45) fully forward.
45.
Remove cotter pin (74), nut (75), three washers
(76), and bolt (77) from bellcrank (45).
46.
Disconnect indicator (78) and move bellcrank
(45) aft.
47.
Install bolt (77), three washers (76), and nut (75)
in bellcrank (45).
11-326