TM 55-1520-240-23-9
11-73
REMOVE PILOTS COCKPIT CONTROL ASSEMBLY
(Continued)
11-73
NOTE
If a crack in the connecting link is
suspected, refer to TM 1-1520-253-23.
1.
Remove 32 screws (1), and washers (2) from
housing (3) of left landing light housing (4).
Remove housing.
2.
Repeat step 1 for right landing light housing (5).
Wires must not support housing;
otherwise, damage to equipment
could occur.
3.
Remove left landing light housing (4) from access
(6). Support housing so it does not hang by
wires (7).
4.
Remove gasket (8) from housing (4).
5.
Strap housing (4) to access (6) at aft end with
strap (9). Wires (7) must not support housing.
Use strap (E376).
6.
Repeat steps 3 thru 5 for right landing light
housing (5).
11-321