TM 55-1520-240-23-9
11-73
REMOVE PILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-73
REMOVE ROLL CONNECTING LINK
18.
Have helper in cockpit hold bolt (31). Working
through right access (32), remove cotter pin (33),
nut (34), and washer (35) from bolt.
19.
Remove bolt (31) and washer (36). Tag and
disconnect roll connecting link (37) from bellcrank
(38).
20.
Install bolt (31), two washers (35 and 36), and
nut (34) in bellcrank (38).
21.
Remove cotter pin (39), nut (40), two washers
(41), and bolt (42) from bellcrank (43).
22.
Remove link (37) from bellcrank (43). Move link
aft and slide fully left.
23.
Install bolt (42), two washers (41), and nut (40)
in bellcrank (43).
11-324
