TM 55-1520-240-23-9
11-52
ADJUST FIRST AND SECOND STAGE BELLCRANK CUMULATIVE STOPS
(Continued)
11-52
13.
Have helper working from forward left work
platform, adjust left yaw/left roll stop bolt (45).
Loosen three nuts (46). Turn bolt until it just
touches bellcrank (47). Tighten nuts (46).
14.
Working from passageway, remove pin (43) from
fitting (36) and bellcranks (34 and 35).
15.
Align most aft hole (48) of bellcrank (35), and
most forward hole (44) of bellcrank (34).
16.
Install pin (43) through hole (44) of bellcrank
(34), bellcrank (35) and in fitting (36).
11-225